Eclipse Vortometric v2.00 Guia de Instalação descarregar pdf (Página 39)

10. Tighten the packing gland at the outer end of the atomizing

steam pipe. A final check on the location of the oil holes in

relation to the nose cone lip can be done as follows:

a. Connect the oil feed line to a water supply line and spray

water out of the nozzle at 5 PSIG.

b. If properly located, then the water streams emerging out of

the oil holes should be separate, distinct and uniform; the

water streams should also clear the inside lip of the nose

cone or just barely touch the lip’s edge.

11. Reinstall the oil gun into the burner and connect all hoses securely.

5-7

Eclipse Vortometric Burner v2.00, Installation Guide 248, 4/10/07

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 50 51

Sem comentários

Eclipse Vortometric v2.00 Guia de Instalação Página 39